Oxygen Detector E2608-O2

A PluraSens oxygen detector-transmitter for preventing dangerous drops in O2 concentration and for confirming oxygen is absent from gas mixtures where needed, using a factory-calibrated, temperature-compensated electrochemical sensor.

Key features

Electrochemical sensor
Two SPST relays
Two analog outputs plus RS485

Reviews

There are no reviews yet.

Be the first to review “Oxygen Detector E2608-O2”

Sensor	electrochemical; sampling: diffusion
Range	0-25 %vol O2; resolution 0.01 %vol
Sensor lifetime	> 2 years
Default alarms	19.5 / 18.0 %vol
Power supply	12-36 VDC (default); 24 VAC or 230 VAC optional
Digital interface	RS485, Modbus RTU
Analog outputs	2 x 4-20 mA / 0-10 V, user-settable
Enclosure	grey ABS plastic, wall mount, IP65
Dimensions	H85 x W82 x D55 mm
Operating	-30 to +50 C, 15-90 %RH

Electrochemical sensor
Two SPST relays
Two analog outputs plus RS485

An electrochemical cell reacts with the target gas diffusing through a membrane, producing a current proportional to gas concentration. The electronics compensate for temperature and convert the signal into analog, relay and Modbus outputs.

Oxygen Detector E2608-O2Fixed Gas Detectors

Ammonia Detector E2618-NH3-P (Explosive Levels)

Sulfur Dioxide Detector E2608-SO2

Key features

Reviews

Reviews

Oxygen Detector E2608-O2Fixed Gas Detectors

Ammonia Detector E2618-NH3-P (Explosive Levels)

Sulfur Dioxide Detector E2608-SO2